Submerged energy dissipation valve

淹没式消能阀 淹没式多喷孔排放阀 淹没式多喷孔阀

Submerged multi nozzle discharge valve
introduction
The submerged multi orifice discharge valve consists of a valve body and an electric actuator. It is mostly used in the municipal water diversion project water plant inlet regulating valve, the surge tank inlet valve in the pipeline, the hydropower station bypass valve, irrigation discharge valve and other occasions. Mainly solves the problems of vibration, cavitation, noise, etc. of traditional valves under harsh working conditions.
feature
Linear adjustment: The opening and flow rate of the valve are linear, allowing for precise adjustment
No vibration and cavitation: Install diversion facilities at the valve elbow to prevent cavitation and vibration even under high pressure differentials and high and low flow rates. The symmetrical arrangement of multiple spiral small holes reduces the vibration of the valve.
Low noise: With appropriate aperture and arrangement, high-speed water flow dissipates energy in the pool, greatly reducing noise.
High flow capacity: The valve nozzle flow rate can reach 9m/s
Low maintenance cost: The special design structure of the valve reduces the possibility of blockage by debris. There is a debris discharge hole at the bottom.
Long service life: Reasonable flow channels and appropriate material selection ensure the long-term service life of the valve.
Small operating force: Hydraulic balance design ensures minimal operating force even under high pressure differentials, prolonging the service life of valve operators and providing significant advantages for regulating valves.
Set different nozzle arrangements according to different working conditions, suitable for harsh working conditions.
Can cut off blocked debris and be used for raw water.